|
|
Price from: £495.00
|
Clocking terminals
-
Magnetic terminal - Swipe your own employee badge at the terminal to Clock IN. Simply repeat process to Clock OUT.
-
Proximity terminal - Hold Up employee proximity card over the PRESENT ID window on the clocking terminal to clock IN. Simply repeat process to Clock OUT.
-
KEYPAD usage on a terminal - To clock IN & OUT you will have to press the F1 button, enter the employee BADGE NO. (does not require leading zeroes) and then press the ACCEPT button to clock IN/OUT. If you make a mistake then you will have to press the REJECT button to get back to the time & date and start again.
-
Biometric (HandScan) Terminal – This terminal can either be used by using a Proximity card or by using the Keypad. Simply follow one of the above steps (2 & 3) to clock IN & OUT, after which the clocking terminal will prompt you to place your registered Hand on the scanner window. It will try to read your hand up to 3 times. Whilst it is doing this the display window may ask you to adjust your hand for better positioning. NB. Make sure your hands are clean & dry.
-
The clocking terminal will confirm with 1 x beep and show either a badge number or the persons name depending on how your system has been configured.
-
If you clock IN/OUT incorrectly the clocking terminal will show ERROR on the display and you will hear multiple beeps.
If you see a message saying TOO SOON AFTER LAST SWIPE then the system has accepted your first clocking and will not accept your card for another “X” amount of minutes (this is normally set to 2 mins by default and can be changed). |
|
|
